The anchor pack comes with the most common hardware we use to secure things like, fridge slides, anchor points, anchor rails and other third party items to the Goose Gear Plate.
4 - 1/4-20 Tee Nuts
4 - 1/4-20x3/4" Bolts
4 - 1/4-20x1" Bolts
4 - 1/4 Flat Washers
4 - 1/4" Split Washers
Directions: For securing your own third party items to the Goose Gear Plate System.
1. With the plate system installed into your vehicle - locate the holes you need drilled.
2. Remove the plate from the vehicle and drill the points you marked out with a 5/16" drill bit. 3. Flip the plate over on its face, preferably on a hard flat surface like a garage floor and hammer the tee nuts into the plate from behind.
4. Reinstall the plate and bolt your items to the tee nuts you installed.