Jeep Wrangler 2024-Present JLU 4 Door - Second Row Seat Delete Plate System - V3

New for the 2024 to current Jeep JLU's. For the 2024+ model years we have modified the support legs to fit with the new wiring locations and raised carpet that is found in newer model Jeeps. These seat deletes are the same overall design and fit as the Newly released V2 Seat Deletes, but have modified support legs to allow for the factory wiring relocation and additions.

This model is designed to fit into 2024-Present Model Year Vehicles.

Here are the Major Changes to V2 which are also found in this V3 product:

1. Tighter fitting joints for a cleaner appearance.

2. Infill panel at doorway is now included in the design and has a tighter fit as well.

3. Center support leg is wider to create a better compartment divider.

4. Center support leg now has slotted mounting points for easier installation.

5. Front support leg has been widened and is a tighter fit as well.

6. Front support leg now has our new slotted pillow extension mounting points integrated.

7. This seat delete comes with the pillow extensions included.

Jeep Wrangler 2024-Present JLU Seat Delete Plate System for the Second Row is available to order for the 60% Passenger Seat and 40% Drivers Seat or can be combined to create a 100% second row delete.

Jeep Wrangler JLU Rear Plate System is required to install the Seat Delete Plate System.

The 60% Passenger Seat Delete Plate System is a bolt in replacement for the 60% rear seat delete. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points to attach it to the Jeep JLU Rear Plate System, no drilling required. If you are installing just the 60% delete you will need to own or purchase a 60% Seat Delete Bracket. This kit DOES NOT include the Jeep JLU Plate System, or the rear seat delete bracket.

Seat delete bracket can be found here

The 40% Driver Seat Delete Plate System is a bolt in replacement for the driver's side second row seat. With this platform you get two storage access doors and all necessary hardware to bolt it to the vehicle at factory anchor points without drilling and anchor points to attach it to the Jeep JLU Rear Plate System which is required to install the platform.

Second Row Seat Deletes require the Rear Plate System™ for installation. Plate System™ sold separately.

This Plate System is NOT compatible with the Jeep Wrangler 4xe.

The Goose Gear plate system and sleeping platform for the Jeep JLU are direct bolt in units and require no drilling into your vehicle for model years 2024+. Designed and built with industrial grade plywood and coating using our propriety spray methods for superior durability and wear resistance.

Also makes a great platform for securing your own storage or gear including dog crates, other fridge slide brands, etc. If you have or plan to run an Ursa Minor J30 this also makes a great stepping platform.

The factory 40% seat weighs 32 pounds.

The 40% Seat Delete weighs 21 pounds

The factory 60% seat weighs 63 pounds.

The 60% Seat Delete weighs 28 pounds.

40% Usable Space: Roughly 31" x 19" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space get reduced to 19" wide x 23" long. Not quite big enough for a typical 35-50 liter refrigerator. Unless you use the front seat in a much more forward position.

60% Usable Space: Roughly 31" x 34" measured at the top of the plate. However, with the front seat back in the full back position with a typical seat recline, the usable space gets reduced to 19" wide x 34" long. Due to the wider width, this product will accommodate a fridge sideways on the delete.