Viair-10005- heavy duty on board air compressor

Heavy Duty OBA

For up to 35" Tires

150 PSI / 2.62 CFM P/N 10005

VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to
install a working system capable of inflating tires right out of the box.

Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

 

air tool icon tire inflation icon air locker icon air horn icon

 

Features:
- 2.5 Gallon VIAIR Air Tank
- 400C VIAIR Compressor
- 35ft. Coil Hose with Tire Chuck
- 1/4” Quick Connect Stud (F)
- 1/4” Quick Connect Coupler (F)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 145 PSI off)
- Reducer: 1/8” (F) to 1/4” (M)
- 1/4” 175 PSI Safety Valve 1/4” Drain Cock
- (3) 1/4” Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4” Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 28 Amps
- Ingress Protection Rating: IP67

2.5 Gallon Tank Fill Rate
0 to 145 PSI 2 min. 20 sec. (± 05 sec.)
110 to 145 PSI 48 sec. (± 03 sec.)
33" x 12.5" Fill Rate
0 to 30 PSI 4 min. 20 sec. (± 10 sec.)
15 to 30 PSI 2 min. 05 sec. (± 05 sec.)
35" x 12.5" Fill Rate
0 to 30 PSI 5 min. 20 sec. (± 15 sec.)
15 to 30 PSI 2 min. 45 sec. (± 10 sec.)
RV Tires 275/80r22.5 Fill Rate
80 to 90 PSI 30 sec. (± 05 sec.)
90 to 100 PSI 3 min. 50 sec. (± 10 sec.)
110 to 130 PSI 4 min. 37 sec. (± 15 sec.)



Related Items