Viair-10008- Super duty on board air compressor

Super Duty OBA

For up to 35" Tires

150 PSI / 3.21 CFM P/N 10008

VIAIR’s Super Duty Onboard Air System is a pre-packaged compressed air solution that provides two fast 325C, 33% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.

Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

 

air tool icon tire inflation icon air locker icon air horn icon

 

Features:
- 2.0 Gallon VIAIR Air Tank
- (2) 325C VIAIR Compressors
- 30ft. Coil Hose with Quick Connects
- Tire Inflation Gun with 200 PSI Gauge
- Dash Panel Gauge with ON/OFF Switch
- 0-220 PSI Pressure Regulator
- Blow Gun Air Tool
- Sealed Pressure Switch (110 PSI on, 145 PSI off)
- (2) 40-amp Relays
- (2) T-Fittings (1/4” (M) x 1/4" (F) x 1/8” (F))
- 1/4” Quick Connect Stud (F)
- 1/4” Quick Connect Coupler (F)
- 1/4” 175 PSI Safety Valve
- 1/4” Drain Cock
- (2) 1/8” BSP to 1/4” NPT
- (4) 1/4” Compression Fittings
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- 4” Strip of Continuous Grommet Material
- Accessory Airline
- Electrical Connections- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 38 Amps
- Ingress Protection Rating: IP67

2.0 Gallon Tank Fill Rate
0 to 145 PSI 1 min. 26 sec. (± 05 sec.)
110 to 145 PSI 25 sec. (± 03 sec.)
33" x 12.5" Fill Rate
0 to 30 PSI 3 min. 40 sec. (± 10 sec.)
15 to 30 PSI 1 min. 50 sec. (± 05 sec.)
35" x 12.5" Fill Rate
0 to 30 PSI 4 min. 36 sec. (± 10 sec.)
15 to 30 PSI 2 min. 20 sec. (± 05 sec.)



Related Items